Battery Balancer and Tester
Charger Leads & Balance Boards
Pass code required
Lost Plane Finder Alarm
Connect the alarm between the servo and the receiver, I.E. act as a servo
Turn on your TX. and you will hear 2 x beep sound.
Do not move any of the control stick on the TX or simply turn off the the TX.
You will hear a continuous beep sound after 1 minute. It will stop once you turn
on your TX or move the control stick.
If you ignore the continuous beep sound for around 2 minutes,
the beep sound will change to a louder sound.
You need to disconnect the alarm from the receiver in order to switch of the
MAKE SURE THE CORRECT POLARITY BEFORE TURN ON THE TX
Click Image to enlarge